dmesg - ADATA SX8200PNP
microcode: microcode updated early to revision 0xd6, date = 2020-04-23
Linux version 5.4.0-40-generic (buildd@lcy01-amd64-011) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2)) #44-Ubuntu SMP Tue Jun 23 00:01:04 UTC 2020 (Ubuntu 5.4.0-40.44-generic 5.4.44)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000069946fff] usable
BIOS-e820: [mem 0x0000000069947000-0x0000000069947fff] ACPI NVS
BIOS-e820: [mem 0x0000000069948000-0x0000000069948fff] reserved
BIOS-e820: [mem 0x0000000069949000-0x000000007a42bfff] usable
BIOS-e820: [mem 0x000000007a42c000-0x000000007a8f0fff] reserved
BIOS-e820: [mem 0x000000007a8f1000-0x000000007a997fff] usable
BIOS-e820: [mem 0x000000007a998000-0x000000007ad44fff] ACPI NVS
BIOS-e820: [mem 0x000000007ad45000-0x000000007b3fefff] reserved
BIOS-e820: [mem 0x000000007b3ff000-0x000000007b3fffff] usable
BIOS-e820: [mem 0x000000007b400000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000087effffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x690ec018-0x6910ba57] usable ==> usable
e820: update [mem 0x690ec018-0x6910ba57] usable ==> usable
e820: update [mem 0x690db018-0x690eb057] usable ==> usable
e820: update [mem 0x690db018-0x690eb057] usable ==> usable
e820: update [mem 0x690cc018-0x690da057] usable ==> usable
e820: update [mem 0x690cc018-0x690da057] usable ==> usable
e820: update [mem 0x69a10018-0x69a17c57] usable ==> usable
e820: update [mem 0x69a10018-0x69a17c57] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x00000000690cc017] usable
reserve setup_data: [mem 0x00000000690cc018-0x00000000690da057] usable
reserve setup_data: [mem 0x00000000690da058-0x00000000690db017] usable
reserve setup_data: [mem 0x00000000690db018-0x00000000690eb057] usable
reserve setup_data: [mem 0x00000000690eb058-0x00000000690ec017] usable
reserve setup_data: [mem 0x00000000690ec018-0x000000006910ba57] usable
reserve setup_data: [mem 0x000000006910ba58-0x0000000069946fff] usable
reserve setup_data: [mem 0x0000000069947000-0x0000000069947fff] ACPI NVS
reserve setup_data: [mem 0x0000000069948000-0x0000000069948fff] reserved
reserve setup_data: [mem 0x0000000069949000-0x0000000069a10017] usable
reserve setup_data: [mem 0x0000000069a10018-0x0000000069a17c57] usable
reserve setup_data: [mem 0x0000000069a17c58-0x000000007a42bfff] usable
reserve setup_data: [mem 0x000000007a42c000-0x000000007a8f0fff] reserved
reserve setup_data: [mem 0x000000007a8f1000-0x000000007a997fff] usable
reserve setup_data: [mem 0x000000007a998000-0x000000007ad44fff] ACPI NVS
reserve setup_data: [mem 0x000000007ad45000-0x000000007b3fefff] reserved
reserve setup_data: [mem 0x000000007b3ff000-0x000000007b3fffff] usable
reserve setup_data: [mem 0x000000007b400000-0x000000007fffffff] reserved
reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000087effffff] usable
efi: EFI v2.60 by American Megatrends
efi: ACPI 2.0=0x7a998000 ACPI=0x7a998000 SMBIOS=0x7b267000 MPS=0xfca20 ESRT=0x77edb718 MEMATTR=0x74fe5018
secureboot: Secure boot disabled
SMBIOS 3.0 present.
DMI: MSI MS-7A71/Z270-A PRO (MS-7A71), BIOS 1.60 06/29/2018
tsc: Detected 4200.000 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x87f000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0080000000 mask 7F80000000 uncachable
1 base 007C000000 mask 7FFC000000 uncachable
2 base 007B800000 mask 7FFF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x7b400 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcd00-0x000fcd0f]
esrt: Reserving ESRT space from 0x0000000077edb718 to 0x0000000077edb750.
e820: update [mem 0x77edb000-0x77edbfff] usable ==> reserved
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
BRK [0x19a601000, 0x19a601fff] PGTABLE
BRK [0x19a602000, 0x19a602fff] PGTABLE
BRK [0x19a603000, 0x19a603fff] PGTABLE
BRK [0x19a604000, 0x19a604fff] PGTABLE
BRK [0x19a605000, 0x19a605fff] PGTABLE
BRK [0x19a606000, 0x19a606fff] PGTABLE
BRK [0x19a607000, 0x19a607fff] PGTABLE
BRK [0x19a608000, 0x19a608fff] PGTABLE
BRK [0x19a609000, 0x19a609fff] PGTABLE
BRK [0x19a60a000, 0x19a60afff] PGTABLE
secureboot: Secure boot disabled
RAMDISK: [mem 0x3c204000-0x3f540fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000007A998000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000007A9980B0 0000E4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000007A9C1210 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000007A998230 028FDE (v02 ALASKA A M I 01072009 INTL 20160422)
ACPI: FACS 0x000000007AD44D80 000040
ACPI: APIC 0x000000007A9C1328 0000BC (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000007A9C13E8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000007A9C1430 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000007A9C14D0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x000000007A9C1510 0003A3 (v01 SataRe SataTabl 00001000 INTL 20160422)
ACPI: MSDM 0x000000007A9C18B8 000055 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x000000007A9C1910 003176 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
ACPI: SSDT 0x000000007A9C4A88 0025A5 (v02 PegSsd PegSsdt 00001000 INTL 20160422)
ACPI: HPET 0x000000007A9C7030 000038 (v01 INTEL KBL 00000001 MSFT 0000005F)
ACPI: SSDT 0x000000007A9C7068 000DE5 (v02 INTEL Ther_Rvp 00001000 INTL 20160422)
ACPI: SSDT 0x000000007A9C7E50 000A2C (v02 INTEL xh_rvp08 00000000 INTL 20160422)
ACPI: UEFI 0x000000007A9C8880 000042 (v01 ALASKA A M I 00000002 01000013)
ACPI: SSDT 0x000000007A9C88C8 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
ACPI: LPIT 0x000000007A9C97A8 000094 (v01 INTEL KBL 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000007A9C9840 000141 (v02 INTEL HdaDsp 00000000 INTL 20160422)
ACPI: SSDT 0x000000007A9C9988 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x000000007A9C9C28 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
ACPI: SSDT 0x000000007A9CCC30 000517 (v02 INTEL TbtTypeC 00000000 INTL 20160422)
ACPI: DBGP 0x000000007A9CD148 000034 (v01 INTEL 00000002 MSFT 0000005F)
ACPI: DBG2 0x000000007A9CD180 000054 (v00 INTEL 00000002 MSFT 0000005F)
ACPI: DMAR 0x000000007A9CD1D8 0000A8 (v01 INTEL KBL 00000001 INTL 00000001)
ACPI: BGRT 0x000000007A9CD280 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: WSMT 0x000000007A9CD2B8 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000087effffff]
NODE_DATA(0) allocated [mem 0x87efd5000-0x87effffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000087effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x0000000069946fff]
node 0: [mem 0x0000000069949000-0x000000007a42bfff]
node 0: [mem 0x000000007a8f1000-0x000000007a997fff]
node 0: [mem 0x000000007b3ff000-0x000000007b3fffff]
node 0: [mem 0x0000000100000000-0x000000087effffff]
Zeroed struct page in unavailable ranges: 27537 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000087effffff]
On node 0 totalpages: 8361071
DMA zone: 64 pages used for memmap
DMA zone: 43 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 7764 pages used for memmap
DMA32 zone: 496850 pages, LIFO batch:63
Normal zone: 122816 pages used for memmap
Normal zone: 7860224 pages, LIFO batch:63
Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
e820: update [mem 0x74c9d000-0x74dfcfff] usable ==> reserved
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
PM: Registered nosave memory: [mem 0x690cc000-0x690ccfff]
PM: Registered nosave memory: [mem 0x690da000-0x690dafff]
PM: Registered nosave memory: [mem 0x690db000-0x690dbfff]
PM: Registered nosave memory: [mem 0x690eb000-0x690ebfff]
PM: Registered nosave memory: [mem 0x690ec000-0x690ecfff]
PM: Registered nosave memory: [mem 0x6910b000-0x6910bfff]
PM: Registered nosave memory: [mem 0x69947000-0x69947fff]
PM: Registered nosave memory: [mem 0x69948000-0x69948fff]
PM: Registered nosave memory: [mem 0x69a10000-0x69a10fff]
PM: Registered nosave memory: [mem 0x69a17000-0x69a17fff]
PM: Registered nosave memory: [mem 0x74c9d000-0x74dfcfff]
PM: Registered nosave memory: [mem 0x77edb000-0x77edbfff]
PM: Registered nosave memory: [mem 0x7a42c000-0x7a8f0fff]
PM: Registered nosave memory: [mem 0x7a998000-0x7ad44fff]
PM: Registered nosave memory: [mem 0x7ad45000-0x7b3fefff]
PM: Registered nosave memory: [mem 0x7b400000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x80000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists, mobility grouping on. Total pages: 8230384
Policy zone: Normal
DMAR: IOMMU enabled
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32675540K/33444284K available (14339K kernel code, 2397K rwdata, 4952K rodata, 2712K init, 4992K bss, 768744K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 44488 entries in 174 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000007a846000 end: 0x0000007a865fff
DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3c8a615336c, max_idle_ns: 440795257976 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 8400.00 BogoMIPS (lpj=16800000)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
TAA: Mitigation: Clear CPU buffers
SRBDS: Mitigation: Microcode
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Core(TM) i7-7700K CPU @ 4.20GHz (family: 0x6, model: 0x9e, stepping: 0x9)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4
MDS CPU bug present and SMT on, data leak possible. See for more details.
TAA CPU bug present and SMT on, data leak possible. See for more details.
#5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 8 processors activated (67200.00 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x69947000-0x69947fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x7a998000-0x7ad44fff] (3854336 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 10:25:30, date: 2020-07-08
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1594203930.032:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 11 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF89A25A860000 00081F (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF89A25A47BC00 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF89A25A4BFE00 000115 (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF89A25A4BD200 0001A4 (v02 PmRef HwpLvt 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF89A25A869800 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF89A25A4BF600 000197 (v02 PmRef ApHwp 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF89A25A4BE600 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 7 GPEs in block 00 to 7F
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:591f] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:5912] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xdd000000-0xddffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0xdf42f000-0xdf42ffff 64bit]
pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdf410000-0xdf41ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a2b1] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xdf42e000-0xdf42efff 64bit]
pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf42d000-0xdf42dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a282] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdf428000-0xdf429fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdf42c000-0xdf42c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:17.0: reg 0x24: [mem 0xdf42b000-0xdf42b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1b.0: [8086:a2e7] type 01 class 0x060400
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.4: [8086:a2eb] type 01 class 0x060400
pci 0000:00:1b.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.4: Intel SPT PCH root port ACS workaround enabled
pci 0000:00:1c.0: [8086:a290] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:a293] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: Intel SPT PCH root port ACS workaround enabled
pci 0000:00:1c.7: [8086:a297] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: Intel SPT PCH root port ACS workaround enabled
pci 0000:00:1f.0: [8086:a2c5] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdf424000-0xdf427fff]
pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xdf420000-0xdf423fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdf400000-0xdf40ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdf42a000-0xdf42a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:01:00.0: [10de:1b06] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
pci 0000:01:00.1: [10de:10ef] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xdf080000-0xdf083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1b.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1cc1:8201] type 00 class 0x010802
pci 0000:03:00.0: reg 0x10: [mem 0xdf300000-0xdf303fff 64bit]
pci 0000:00:1b.4: PCI bridge to [bus 03]
pci 0000:00:1b.4: bridge window [mem 0xdf300000-0xdf3fffff]
acpiphp: Slot [1-1] registered
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:05:00.0: reg 0x18: [mem 0xdf204000-0xdf204fff 64bit]
pci 0000:05:00.0: reg 0x20: [mem 0xdf200000-0xdf203fff 64bit]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:06:00.0: [1b4b:9215] type 00 class 0x010601
pci 0000:06:00.0: reg 0x10: [io 0xc050-0xc057]
pci 0000:06:00.0: reg 0x14: [io 0xc040-0xc043]
pci 0000:06:00.0: reg 0x18: [io 0xc030-0xc037]
pci 0000:06:00.0: reg 0x1c: [io 0xc020-0xc023]
pci 0000:06:00.0: reg 0x20: [io 0xc000-0xc01f]
pci 0000:06:00.0: reg 0x24: [mem 0xdf140000-0xdf1407ff]
pci 0000:06:00.0: reg 0x30: [mem 0xdf100000-0xdf13ffff pref]
pci 0000:06:00.0: PME# supported from D3hot
pci 0000:00:1c.7: PCI bridge to [bus 06]
pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.7: bridge window [mem 0xdf100000-0xdf1fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:00:02.0: vgaarb: no bridge control possible
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x690cc018-0x6bffffff]
e820: reserve RAM buffer [mem 0x690db018-0x6bffffff]
e820: reserve RAM buffer [mem 0x690ec018-0x6bffffff]
e820: reserve RAM buffer [mem 0x69947000-0x6bffffff]
e820: reserve RAM buffer [mem 0x69a10018-0x6bffffff]
e820: reserve RAM buffer [mem 0x74c9d000-0x77ffffff]
e820: reserve RAM buffer [mem 0x77edb000-0x77ffffff]
e820: reserve RAM buffer [mem 0x7a42c000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7a998000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7b400000-0x7bffffff]
e820: reserve RAM buffer [mem 0x87f000000-0x87fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0a00-0x0a0f] has been reserved
system 00:00: [io 0x0a10-0x0a1f] has been reserved
system 00:00: [io 0x0a20-0x0a2f] has been reserved
system 00:00: [io 0x0a30-0x0a3f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:03: [io 0x0680-0x069f] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0x1800-0x18fe] has been reserved
system 00:03: [io 0x164e-0x164f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x0800-0x087f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x1854-0x1857] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xdffc0000-0xdffdffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io 0xff00-0xfffe] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1b.0: PCI bridge to [bus 02]
pci 0000:00:1b.4: PCI bridge to [bus 03]
pci 0000:00:1b.4: bridge window [mem 0xdf300000-0xdf3fffff]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:00:1c.7: PCI bridge to [bus 06]
pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.7: bridge window [mem 0xdf100000-0xdf1fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xdf300000-0xdf3fffff]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xdf200000-0xdf2fffff]
pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:06: resource 1 [mem 0xdf100000-0xdf1fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Initramfs unpacking failed: Decoding failed
Freeing initrd memory: 52468K
DMAR: No ATSR found
DMAR: dmar0: Using Queued invalidation
DMAR: dmar1: Using Queued invalidation
pci 0000:00:00.0: Adding to iommu group 0
pci 0000:00:01.0: Adding to iommu group 1
pci 0000:00:02.0: Adding to iommu group 2
pci 0000:00:08.0: Adding to iommu group 3
pci 0000:00:14.0: Adding to iommu group 4
pci 0000:00:14.2: Adding to iommu group 4
pci 0000:00:16.0: Adding to iommu group 5
pci 0000:00:17.0: Adding to iommu group 6
pci 0000:00:1b.0: Adding to iommu group 7
pci 0000:00:1b.4: Adding to iommu group 8
pci 0000:00:1c.0: Adding to iommu group 9
pci 0000:00:1c.3: Adding to iommu group 10
pci 0000:00:1c.7: Adding to iommu group 11
pci 0000:00:1f.0: Adding to iommu group 12
pci 0000:00:1f.2: Adding to iommu group 12
pci 0000:00:1f.3: Adding to iommu group 12
pci 0000:00:1f.4: Adding to iommu group 12
pci 0000:01:00.0: Adding to iommu group 1
pci 0000:01:00.1: Adding to iommu group 1
pci 0000:03:00.0: Adding to iommu group 13
pci 0000:05:00.0: Adding to iommu group 14
pci 0000:06:00.0: Adding to iommu group 15
DMAR: Intel(R) Virtualization Technology for Directed I/O
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=23 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuse ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0xb0000000, using 1876k, total 1875k
efifb: mode is 800x600x32, linelength=3200, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.4.1 model 0x9E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.0-40-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.4.0-40-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb: port power management may be unreliable
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: registered as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:08 [mem 0xfdb00000-0xfdffffff]
caller pmc_core_probe+0x7f/0x17f mapping multiple BARs
intel_pmc_core INT33A1:00: initialized
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x906e9, pf=0x2, revision=0xd6
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (455367581, 414422)->(463141006, -7359003)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: c7397aba4b613cce0e4070f289f6e01155c15620'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 12:41:426
rtc_cmos 00:05: setting system clock to 2020-07-08T10:25:30 UTC (1594203930)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2712K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1192K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
ahci 0000:00:17.0: version 3.0
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
nvme nvme0: pci function 0000:03:00.0
libphy: r8169: probed
r8169 0000:05:00.0 eth0: RTL8168h/8111h, 4c:cc:6a:f8:3a:ab, XID 541, IRQ 131
r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
r8169 0000:05:00.0 enp5s0: renamed from eth0
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xdf42b000 port 0xdf42b100 irq 129
ata2: SATA max UDMA/133 abar m2048@0xdf42b000 port 0xdf42b180 irq 129
ata3: SATA max UDMA/133 abar m2048@0xdf42b000 port 0xdf42b200 irq 129
ata4: SATA max UDMA/133 abar m2048@0xdf42b000 port 0xdf42b280 irq 129
ata5: SATA max UDMA/133 abar m2048@0xdf42b000 port 0xdf42b300 irq 129
ata6: SATA max UDMA/133 abar m2048@0xdf42b000 port 0xdf42b380 irq 129
ahci 0000:06:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:06:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi host6: ahci
scsi host7: ahci
scsi host8: ahci
scsi host9: ahci
ata7: SATA max UDMA/133 abar m2048@0xdf140000 port 0xdf140100 irq 132
ata8: SATA max UDMA/133 abar m2048@0xdf140000 port 0xdf140180 irq 132
ata9: SATA max UDMA/133 abar m2048@0xdf140000 port 0xdf140200 irq 132
ata10: SATA max UDMA/133 abar m2048@0xdf140000 port 0xdf140280 irq 132
nvme nvme0: 8/0/0 default/read/poll queues
nvme0n1: p1 p2 p3 p4
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata2.00: NCQ Send/Recv Log not supported
ata2.00: ATA-9: ST2000VN004-2E4164, SC60, max UDMA/133
ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: NCQ Send/Recv Log not supported
ata2.00: configured for UDMA/133
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ATA-9: KINGSTON SM2280S3G2480G, SAFM01.R, max UDMA/133
ata1.00: 937703088 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA KINGSTON SM2280S 01.R PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access ATA ST2000VN004-2E41 SC60 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
ata3.00: NCQ Send/Recv Log not supported
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata3.00: ATA-9: ST2000VN004-2E4164, SC60, max UDMA/133
ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata4.00: NCQ Send/Recv Log not supported
ata4.00: ATA-9: ST2000VN004-2E4164, SC60, max UDMA/133
ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata5.00: NCQ Send/Recv Log not supported
ata5.00: ATA-9: ST2000VN004-2E4164, SC60, max UDMA/133
ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: NCQ Send/Recv Log not supported
ata3.00: configured for UDMA/133
ata4.00: NCQ Send/Recv Log not supported
ata4.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST2000VN004-2E41 SC60 PQ: 0 ANSI: 5
ata5.00: NCQ Send/Recv Log not supported
ata5.00: configured for UDMA/133
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: Direct-Access ATA ST2000VN004-2E41 SC60 PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 3:0:0:0: [sdd] 4096-byte physical blocks
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
scsi 4:0:0:0: Direct-Access ATA ST2000VN004-2E41 SC60 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 4:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 4:0:0:0: [sde] 4096-byte physical blocks
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata8: SATA link down (SStatus 0 SControl 300)
ata6.00: ATA-10: ST8000VN0022-2EL112, SC61, max UDMA/133
ata6.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA ST8000VN0022-2EL SC61 PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg5 type 0
sd 5:0:0:0: [sdf] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
sd 5:0:0:0: [sdf] 4096-byte physical blocks
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sdd: sdd1 sdd9
sd 3:0:0:0: [sdd] Attached SCSI disk
sdf: sdf1 sdf9
sde: sde1 sde9
sd 5:0:0:0: [sdf] Attached SCSI disk
sd 4:0:0:0: [sde] Attached SCSI disk
sdb: sdb1 sdb9
sd 1:0:0:0: [sdb] Attached SCSI disk
sdc: sdc1 sdc9
sd 2:0:0:0: [sdc] Attached SCSI disk
ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.00: ATA-8: SAMSUNG HD321KJ, CP100-10, max UDMA7
ata7.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 32), AA
ata10.00: ATA-8: SAMSUNG HD321KJ, CP100-10, max UDMA7
ata10.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 32), AA
ata7.00: configured for UDMA/133
ata10.00: configured for UDMA/133
scsi 6:0:0:0: Direct-Access ATA SAMSUNG HD321KJ 0-10 PQ: 0 ANSI: 5
sd 6:0:0:0: Attached scsi generic sg6 type 0
sd 6:0:0:0: [sdg] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 6:0:0:0: [sdg] Write Protect is off
sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata9.00: ATA-8: WDC WD10TPVT-00U4RT1, 01.01A01, max UDMA/133
ata9.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA
ata9.00: configured for UDMA/133
scsi 8:0:0:0: Direct-Access ATA WDC WD10TPVT-00U 1A01 PQ: 0 ANSI: 5
sd 8:0:0:0: Attached scsi generic sg7 type 0
sd 8:0:0:0: [sdh] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 8:0:0:0: [sdh] 4096-byte physical blocks
sd 8:0:0:0: [sdh] Write Protect is off
sd 8:0:0:0: [sdh] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 9:0:0:0: Direct-Access ATA SAMSUNG HD321KJ 0-10 PQ: 0 ANSI: 5
sd 9:0:0:0: Attached scsi generic sg8 type 0
sd 9:0:0:0: [sdi] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 9:0:0:0: [sdi] Write Protect is off
sd 9:0:0:0: [sdi] Mode Sense: 00 3a 00 00
sd 9:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdg: sdg1 sdg9
sd 6:0:0:0: [sdg] Attached SCSI removable disk
sdi: sdi1 sdi9
sd 9:0:0:0: [sdi] Attached SCSI removable disk
sdh: sdh1 sdh9
sd 8:0:0:0: [sdh] Attached SCSI removable disk
tsc: Refined TSC clocksource calibration: 4200.002 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3c8a631d5be, max_idle_ns: 440795208828 ns
clocksource: Switched to clocksource tsc
fbcon: Taking over console
Console: switching to colour frame buffer device 100x37
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3.1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: /lib/systemd/system/rpc-statd.service:16: PIDFile= references a path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly.
systemd[1]: Created slice Virtual Machine and Container Slice.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Libvirt guests shutdown.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on RPCbind Server Activation Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting NFSD configuration filesystem...
systemd[1]: Mounting RPC Pipe File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
systemd[1]: Starting Availability of block devices...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Availability of block devices.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Uncomplicated firewall.
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
systemd[1]: modprobe@drm.service: Succeeded.
systemd[1]: Finished Load Kernel Module drm.
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd[1]: Mounted RPC Pipe File System.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Activating swap /swapfile...
systemd[1]: Starting pNFS block layout mapping daemon...
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Create System Users...
systemd[1]: Started pNFS block layout mapping daemon.
lp: driver loaded but no devices found
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
systemd[1]: Mounted NFSD configuration filesystem.
ppdev: user-space parallel port driver
systemd[1]: Finished Create System Users.
parport_pc 00:01: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP]
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Finished Set the console keyboard layout.
Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
systemd[1]: Activated swap /swapfile.
systemd[1]: Reached target Swap.
systemd[1]: Finished udev Coldplug all Devices.
systemd[1]: Starting udev Wait for Complete Device Initialization...
systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Mounting Mount unit for core18, revision 1705...
systemd[1]: Mounting Mount unit for core18, revision 1754...
systemd[1]: Mounting Mount unit for gnome-3-28-1804, revision 128...
systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 24...
systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 36...
systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1506...
systemd[1]: Mounting Mount unit for snap-store, revision 415...
systemd[1]: Mounting Mount unit for snap-store, revision 467...
systemd[1]: Mounting Mount unit for snapd, revision 7777...
systemd[1]: Mounting Mount unit for snapd, revision 8140...
systemd[1]: Condition check resulted in Virtual Machine and Container Storage (Compatibility) being skipped.
systemd[1]: Reached target Containers.
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Starting Show Plymouth Boot Screen...
lp0: using parport0 (interrupt-driven).
systemd[1]: Received SIGRTMIN+20 from PID 481 (plymouthd).
nct6775: Found NCT6795D or compatible chip at 0x4e:0xa20
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Show Plymouth Boot Screen.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Mounted Mount unit for gnome-3-28-1804, revision 128.
systemd[1]: Mounted Mount unit for core18, revision 1754.
systemd[1]: Mounted Mount unit for gnome-3-34-1804, revision 24.
systemd[1]: Mounted Mount unit for core18, revision 1705.
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
systemd[1]: Mounted Mount unit for gnome-3-34-1804, revision 36.
systemd[1]: Started Journal Service.
i915 0000:00:02.0: VT-d active for gfx access
checking generic (b0000000 1d5000) vs hw (b0000000 10000000)
fb0: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: vgaarb: deactivate vga console
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
systemd-journald[415]: Received client request to flush runtime journal.
cryptd: max_cpu_qlen set to 1000
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[drm] failed to retrieve link info, disabling eDP
[drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[drm] Cannot find any crtc or sizes
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
intel_rapl_common: Found RAPL domain dram
[drm] Cannot find any crtc or sizes
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[drm] Cannot find any crtc or sizes
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input4
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
zlua: loading out-of-tree module taints kernel.
zlua: module license 'MIT' taints kernel.
Disabling lock debugging due to kernel taint
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
ZFS: Loaded module v0.8.3-1ubuntu12, ZFS pool version 5000, ZFS filesystem version 5
audit: type=1400 audit(1594203942.210:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=3151 comm="apparmor_parser"
audit: type=1400 audit(1594203942.210:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=3148 comm="apparmor_parser"
audit: type=1400 audit(1594203942.210:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=3155 comm="apparmor_parser"
audit: type=1400 audit(1594203942.210:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=3155 comm="apparmor_parser"
audit: type=1400 audit(1594203942.210:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=3154 comm="apparmor_parser"
audit: type=1400 audit(1594203942.210:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=3154 comm="apparmor_parser"
audit: type=1400 audit(1594203942.210:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=3154 comm="apparmor_parser"
audit: type=1400 audit(1594203942.210:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirtd" pid=3150 comm="apparmor_parser"
audit: type=1400 audit(1594203942.210:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirtd//qemu_bridge_helper" pid=3150 comm="apparmor_parser"
audit: type=1400 audit(1594203942.218:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=3160 comm="apparmor_parser"
Generic FE-GE Realtek PHY r8169-500:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-500:00, irq=IGNORE)
r8169 0000:05:00.0 enp5s0: Link is Down
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
bpfilter: Loaded bpfilter_umh pid 3482
Started bpfilter
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
NFSD: Using UMH upcall client tracking operations.
NFSD: starting 90-second grace period (net f00000a8)
L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and for details.
vfio-pci 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=none
xhci_hcd 0000:00:14.0: remove, state 4
usb usb2: USB disconnect, device number 1
xhci_hcd 0000:00:14.0: USB bus 2 deregistered
xhci_hcd 0000:00:14.0: remove, state 4
usb usb1: USB disconnect, device number 1
xhci_hcd 0000:00:14.0: USB bus 1 deregistered
virbr0: port 2(vnet0) entered blocking state
virbr0: port 2(vnet0) entered disabled state
device vnet0 entered promiscuous mode
virbr0: port 2(vnet0) entered blocking state
virbr0: port 2(vnet0) entered listening state
cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation
rfkill: input handler disabled
vfio-pci 0000:01:00.0: enabling device (0000 -> 0003)
vfio-pci 0000:01:00.0: vfio_ecap_init: hiding ecap 0x19@0x900
r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
virbr0: port 2(vnet0) entered learning state
virbr0: port 2(vnet0) entered forwarding state
virbr0: topology change detected, propagating